Description
• Galvanized and painted sheet steel enclosure.
• Aesthetic front panel made of plastic resin (ABS).
• Internal components made of EPP.
• Round duct connection ports, nominal diameter 160 mm.
• 2 EC (brushless) motors, external rotor, controlled at constant airflow (CAV), with shaft turning in ball bearings to grant a “maintenance free” functioning, each coupled to a forward curved centrifugal impeller; 4 speeds, independently adjustable at the installation.
• High efficiency counter-flow heat exchanger in PS resin.
• Automatic, 100% filtered, mechanic by-pass, granting people comfort in the rooms in mid-season or when the outside temperature does not require the action of the heat exchanger.
• Automatic frost-protection to prevent icing on the heat exchanger.
• 3 x ISO Coarse 90% (G4) filters, respectively on extraction, supply ports and for the by-pass. ePM10 50% (M5) and ePM1 55% (F7) filters available as optional per the supply port and for by-pass.
• Condense water tray with discharge pipes.
• Wired control panel with LCD display, which allows:
• to switch on / off the unit;
• the first set-up;
• to set the speed;
• to set the weekly timer;
• to monitor the correct product operation (any faults are shown on the display);
• to show the product functioning (speed set, by-pass status, defrosting activation, pre and/or post heaters activation if installed);
• to show the filters status.
• Brackets for wall-mounted installation supplied as standard.
• Possibility of connection to environmental external sensors (available as optional), for automatic functioning control.
• Possibility of integration in home automation environment through ModBus protocol.