Description

• Material: UV resistant plastic (prevents ageing caused by exposure to sunlight).
• Nominal diameter: 100 mm
• Motor with thermal overload protection and shaft turning in ball bearings.
• Maximum air flow, rear: 80 m3/h
• Maximum air flow, side: 70 m3/h
• Vertical outlet port supplied as standard with spigot positionable horizontally by means of diverter.
• Rear outlet port equipped with non-return damper.
• Equipped with electronic timer designed to shut off the motor automatically after a set interval, selectable during installation in the range 3’-20’ (default setting 3’).
• IMQ SAFETY and IMQ PERFORMANCE certifications
• Vortice speed controller.

Read full descriptionClose description

Certifications

IMQ
CE
Download
IMQ Performance
EAC
UKCA

Technical Data Sheet

Frequency (Hz)

50
Insulation class

II°
IP

X4
Max absorbed current (A)

0,13
Max absorbed power (W)

19
Max absorbed power at Max speed (W)

19
Max ambient temperature for continuous operation (°C)

40
Nominal diameter (mm)

100
Ø Discharge hole (mm)

96,5

Voltage (V)

230
Weight (Kg)

1,9
Max airflow (l/s)

uscita: posteriore 22,2 laterale 19,4
Max airflow (m³/h)

80
Max pressure (mmH2O)

11
Max pressure (Pa)

108
Max pressure at Max speed (mmH20)

11
RPM

2360
RPM side air outlet - max speed

2460

Supplier's name or trade mark

Vortice
Specific Energy Consumption (SEC) class in temperate climate zone

NA
Specific Energy Consumption (SEC) class in temperate climate zone [kWh/m2y]

-5,3
Specific Energy Consumption class SEC in cold climate zone [kWh/m2y]

-18,6
Specific Energy Consumption class SEC in warm climate zone [kWh/m2y]

2,4
Declared type

UVR-U: unidirezionale
Type of drive

NA
Type of heat recovery system HRS

assente
Thermal efficiency of heat recovery at reference airflow [%]

NA
Max airflow [m3/h]

72
Fan drive electric power input, including any motor control equipment, at maximum flow rate [W]

13,5
Sound power LWA [dB(A)]

64
Reference airflow [m3/s]

0,0140
Reference ? pressure [Pa]

72
SPI [W/(m3/h)]

0,25198
Control factor CTRL

1
Control type

manuale
Max internal leakage rate [%]

NA
Max external leakage rate [%]

NA
Mixing rate

NA
Position and description of visual filter warning

NA
Airflow sensitivity to pressure variations at + 20 Pa and – 20 Pa

NA
Indoor/outdoor air tightness [m3/h]

NA
Annual electricity consumption (AEC) [kWh electricity/y]

347
AHS temperate annual energy saved [kWh primary energy/y]

1397
AHS cold annual energy saved [kWh primary energy/y]

2732
AHS warm annual energy saved [kWh primary energy/y]

632