Description

• Base manufactured from phosphated pressed steel, epoxy powder coated with hammered effect finish, guaranteeing long-term resistance to atmospheric agents.
• Aerodynamically contoured inlet port for optimum performance, fashioned as a single unit with the base and gauged to optimize air flow.
• Pressed steel motor cover: pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Pressed steel side baffles angled to exhaust extracted air upwards: zinc-coated, pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Accident prevention and anti-bird grilles (to UNI ISO 13857 standard), consisting of electrically welded steel rings with epoxy powder coated finish, colour black.
• Centrifugal impeller with self-cleaning backward curved steel blades, hot-dip galvanized and dynamically balanced (UNI ISO 1940, Point 1 – Class 6.3), and splined steel hub.
• 1 speed three-phase AC motor, size to UNEL MEC standard, flange B5, with shaft turning in double shielded ball bearings, insulation class F.
• Cooling fan for better dissipation of heat
• Galvanized steel eye lugs for transport and lifting/handling operations.
• Cable guaranteeing continuity of earth connection.
• Steel safety wire for anchoring appliances once installed.
• Vortice speed controller.
Read full descriptionClose description

Certifications

  • CE CE
  • EAC EAC

Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    2,10
  • Max absorbed power (W)
    930
  • Max ambient temperature for continuous operation (°C)
    80
  • Motor protection IP
    55
  • Nominal diameter (mm)
    500
  • Number of phases (Ph)
    3
  • Number of poles
    8
  • Voltage (V)
    400
  • Weight (Kg)
    171
  • Max airflow (l/s)
    3056
  • Max airflow (m³/h)
    11000
  • Max pressure (mmH2O)
    34
  • Max pressure (Pa)
    334
  • RPM
    715
  • Sound pressure Lp [dB (A)] at 3 m
    71
  • Dimension Q (mm)
    Ø 12
  • Size A (mm)
    1462
  • Size B (mm)
    980
  • Size C (mm)
    900
  • Size D (mm)
    1010
  • Size E (mm)
    595
  • Size F (mm)
    38
  • Size G (mm)
    40
  • Size H (mm)
    903
  • Size L (mm)
    465
  • Size M (mm)
    Ø 472
  • Size N (mm)
    Ø 715
quota
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.

Accessories

Discover accessories related to the product

IRT 35
IRT 35
• Three-phase speed controller
IRET 6
IRET 6
• Three-phase electronic speed controller
TR-G 100/150/180/210 6-8P(GRIGLI APROT.)
TR-G 100/150/180/210 6-8P(GRIGLI APROT.)
Intake port protection grille for use when the unit is mounted within reach.
TR-B 100/150/180/210 6-8P (BOCC. ASPIR.)
TR-B 100/150/180/210 6-8P (BOCC. ASPIR.)
Intake nozzle to fit on intake side for optimizing intake and reducing noise level.
TR-CU 100/150/180/210 6-8P(CONTROT.BASE)
TR-CU 100/150/180/210 6-8P(CONTROT.BASE)
Installation base counter-frame.
TR-S 100/150/180/210 6-8P(SERRANDA GRA.)
TR-S 100/150/180/210 6-8P(SERRANDA GRA.)
Galvanized sheet-metal gravity backdraught shutter.
• With aluminium shutters and return spring, for preventing air backdraughts or penetration of rain when the unit ...
IREM INVERTER 4.2
IREM INVERTER 4.2
Single-phase speed controller INVERTER
IRET INVERTER 2.2
IRET INVERTER 2.2
Three-phase speed controller INVERTER.
IRET INVERTER 2,5 M
IRET INVERTER 2,5 M
Three-phase speed controller
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info