Description

• Nominal diameter of blades 900 mm
• Top and bottom motor covers moulded from heat-resistant and UV-resistant thermoplastic resin (ABS), colour white
• Wiring connections at end of ceiling rod concealed by domes moulded from impact- and UV-resistant PP, colour white.
• Single phase start capacitor motor with external rotor, and shaft turning in ball bearings.
• Maximum air flow: 8,550 m3/h.
• 3 sheet steel blades powder coated with scratch-resistant polyester, colour white.
• Steel ceiling rod with polyester powder coated finish, colour white, length 375 mm.
• Bag of accessories containing nuts and bolts required for assembly of blades, ceiling hook and rubber anti-vibration washer.
• Factory-prepared to accept Light Kit (optional), suitable for lamp rated 150W max with
E27 screw fitting, or equivalent energy-saving lamp with E27 screw fitting.
• Speed selectable by way of control units (optional)
Read full descriptionClose description

Certifications

nordik_international_plus_ambiente01
nordik_international_plus_ambiente02

Technical Data Sheet

  • Fan diameter
    90
  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    0,32
  • Max absorbed power (W)
    70
  • Voltage (V)
    220-240
  • Weight (Kg)
    5
  • giri_minuto
    228
  • Max airflow (m³/h)
    8550
  • Max airflow (m³/min)
    142,50
  • Max flow speed (m/s)
    2,59
  • RPM
    228
  • Service value (m³/min)/W
    2,036
  • Sound power Lw [dB(A)]
    46,1
  • Size A (mm)
    Ø 914
  • Size B (mm)
    Ø 230
  • Size C (mm)
    495
quota

Accessories

Discover accessories related to the product

TELENORDIK 5T
TELENORDIK 5T
Infrared remote control suitable for ceiling fans with or without light.
• 5 selectable speeds, as well as fan and light on/off switch.
• “Timer” button to set f...
PLUS LIGHT KIT (KIT LUCE)
PLUS LIGHT KIT (KIT LUCE)
Light kit for all Nordik International Plus models.
• Lamp: max 150 W.
KIT SCB5 (TRASF.5 V.)
KIT SCB5 (TRASF.5 V.)
Built-in controller adaptor.
• 5 speeds.
SCNR5 UNIF.X NK SOFFITTO
SCNR5 UNIF.X NK SOFFITTO
• 5-position speed controller for ceiling-mounted fans without light.
SCNRL5 UNIF. X NK SOFFITTO
SCNRL5 UNIF. X NK SOFFITTO
• 5-position speed controller for ceiling-mounted fans with light.
C 2.5 (COMANDO EL. 2.5 A)
C 2.5 (COMANDO EL. 2.5 A)
• Electronic speed controller.
• Maximum load 2.5 A.
SC 503 B
SC 503 B
Flush mounted speed controller.

• colour: White.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• Thanks to t...
SC 503 N
SC 503 N
Flush mounted speed controller.

• Colour: anthracite grey.
• New flush or wall mounted speed controllers for the entire range of Vortice ceiling fans.
• T...
SC EXT B
SC EXT B
Wall mounted speed controller.

• colour: White.
• consists of the same unit as in the flush mounted version with the addition of a casing to be fitted to the ...
SCI503
SCI503
Flush mounting 503 box able to house the control unit.
PSC-W
PSC-W
Face plate (white).
PSC-B
PSC-B
Face plate (anthracite grey).
KIT SCB (TRASF.E.C.)
KIT SCB (TRASF.E.C.)
• Built-in controller adaptor.
ASTA NK I 200 BIANCA
ASTA NK I 200 BIANCA
• NK I 200 White Rod to enable installation at desired height.
ASTA NK I 250 BIANCA
ASTA NK I 250 BIANCA
• NK I 250 White Rod to enable installation at desired height.
ASTA NK I 350 BIANCA
ASTA NK I 350 BIANCA
• NK 350 I White Rod to enable installation at desired height.
ASTA NK I 500 BIANCA
ASTA NK I 500 BIANCA
• NK I 500 White Rod enable installation at desired height.
ASTA NK I 750 BIANCA
ASTA NK I 750 BIANCA
• NK I 750 White Rod to enable installation at desired height.
ASTA NK I 1000 BIANCA
ASTA NK I 1000 BIANCA
• NK I 1000 White Rod to enable installation at desired height.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info