Description

• Base manufactured from phosphated pressed steel, epoxy powder coated with hammered effect finish, guaranteeing long-term resistance to atmospheric agents.
• Aerodynamically contoured inlet port for optimum performance, fashioned as a single unit with the base and gauged to optimize air flow.
• Pressed steel motor cover: pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Pressed steel side baffles angled to exhaust extracted air upwards: zinc-coated, pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Accident prevention and anti-bird grilles (to UNI ISO 13857 standard), consisting of electrically welded steel rings with epoxy powder coated finish, colour black.
• Centrifugal aluminium impeller with self-cleaning backward curved blades, dynamically balanced (UNI ISO 1940, Point 1 – Class 6.3), and splined aluminium hub.
• 1 speed three-phase AC motor, size to UNEL MEC standard, flange B5, with shaft turning in double shielded ball bearings, insulation class F.
• Cooling fan for better dissipation of heat
• Galvanized steel eye lugs for transport and lifting/handling operations.
• Cable guaranteeing continuity of earth connection.
• Steel safety wire for anchoring appliances once installed.
• Vortice speed controller.
Read full descriptionClose description

Certifications

  • CE CE
  • EAC EAC

Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    0,75
  • Max absorbed power (W)
    400
  • Max ambient temperature for continuous operation (°C)
    90
  • Motor protection IP
    55
  • Nominal diameter (mm)
    250
  • Number of phases (Ph)
    3
  • Number of poles
    4
  • Voltage (V)
    400
  • Weight (Kg)
    45
  • Max airflow (l/s)
    889
  • Max airflow (m³/h)
    3200
  • Max pressure (mmH2O)
    46
  • Max pressure (Pa)
    451
  • RPM
    1400
  • Sound pressure Lp [dB (A)] at 3 m
    67
  • Dimension Q (mm)
    Ø 11
  • Size A (mm)
    907
  • Size B (mm)
    550
  • Size C (mm)
    500
  • Size D (mm)
    580
  • Size E (mm)
    432
  • Size F (mm)
    38
  • Size G (mm)
    25
  • Size H (mm)
    604
  • Size L (mm)
    244
  • Size M (mm)
    Ø 265,5
  • Size N (mm)
    Ø 404
quota
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.

Accessories

Discover accessories related to the product

IRT 35
IRT 35
• Three-phase speed controller
TR-S 20/30/50 (SERRANDA A GRAVITA')
TR-S 20/30/50 (SERRANDA A GRAVITA')
Galvanized sheet-metal gravity backdraught shutter.
• With aluminium shutters and return spring, for preventing air backdraughts or penetration of rain when the unit ...
TR-CU 20/30/50 (CONTROTELAIO DI BASE U)
TR-CU 20/30/50 (CONTROTELAIO DI BASE U)
Installation base counter-frame.
TR-B 20/30/50 (BOCCAGLIO ASPIRAZIONE)
TR-B 20/30/50 (BOCCAGLIO ASPIRAZIONE)
Intake nozzle to fit on intake side for optimizing intake and reducing noise level.
TR-G 20/30/50 (GRIGLIA DI PROTEZIONE)
TR-G 20/30/50 (GRIGLIA DI PROTEZIONE)
Intake port protection grille for use when the unit is mounted within reach.
IREM INVERTER 1.4
IREM INVERTER 1.4
Single-phase speed controller INVERTER
IRET INVERTER 1.2
IRET INVERTER 1.2
Single-phase speed controller INVERTER.
IRET INVERTER 2,5 M
IRET INVERTER 2,5 M
Three-phase speed controller
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info