Description

• Centrifugal roof fan suitable for extracting hot fumes at up to 400 °C for 120 minutes.
• Base manufactured from phosphated pressed steel, epoxy powder coated with hammered effect finish, guaranteeing long-term resistance to atmospheric agents.
• Aerodynamically contoured inlet port for optimum performance, fashioned as a single unit with the base and gauged to optimize air flow.
• Motor mounting plate made of steel with galvanization surface treatment.
• Protective cap carried by top plate made of steel with galvanization surface treatment.
• Cold outside air drawn into a cooling chamber made of pressed steel with polyester powder coated and oven baked hammered effect finish, colour grey.
• Pressed steel motor cover: pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Accident prevention and anti-bird grilles (to UNI ISO 13857 standard), consisting of electrically welded steel rings with epoxy powder coated finish, colour black.
• Centrifugal impeller with self-cleaning backward curved blades, dynamically balanced (UNI ISO 1940, Point 1 – Class 6.3), made of electrolytically galvanized steel.
• 1 speed single phase AC motor with shaft turning in ball bearings, size to UNEL MEC standard, flange B5, self-ventilating. Motor insulation class H, with metal cooling fan and cable gland.
• Maximum air flow: 1000 m3/h.
• Equipped with a motor start capacitor that must be installed remotely from the fan so that it cannot be damaged through direct exposure to heat.
• Galvanized steel eye lugs for transport and lifting/handling operations.
• Cable guaranteeing continuity of earth connection.
• Steel safety wire for anchoring appliances once installed.
• Vortice speed controller.
Read full descriptionClose description

Certifications

torrette_tr_ed_v_ambiente03
torrette_tr_ed_v_ambiente01
torrette_tr_ed_v_ambiente02

Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    0,45
  • Max absorbed power (W)
    100
  • Max ambient temperature for continuous operation (°C)
    90
  • Motor protection IP
    55
  • Nominal diameter (mm)
    200
  • Number of phases (Ph)
    1
  • Number of poles
    4
  • Voltage (V)
    230
  • Weight (Kg)
    32
  • Max airflow (l/s)
    278
  • Max airflow (m³/h)
    1000
  • Max pressure (mmH2O)
    20,0
  • Max pressure (Pa)
    196
  • RPM
    1450
  • Sound pressure Lp [dB (A)] at 3 m
    56
  • Dimension Q (mm)
    Ø 11
  • Dimension R (mm)
    40
  • Size A (mm)
    652
  • Size B (mm)
    410
  • Size C (mm)
    357
  • Size D (mm)
    440
  • Size E (mm)
    328
  • Size F (mm)
    38
  • Size G (mm)
    26,5
  • Size H (mm)
    538
  • Size M (mm)
    Ø 187,5
  • Size N (mm)
    Ø 284
  • Size S (mm)
    134
quota
Curva_JPG_15160-Curve_per_Catalogo
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.
Documentation
You can see all the documentation relating to this product: price list, information booklet and wiring diagram.

Accessories

Discover accessories related to the product

TR-CU 10/15 (CONTROTELAIO DI BASE U.)
TR-CU 10/15 (CONTROTELAIO DI BASE U.)
Installation base counter-frame.
IRM 30
IRM 30
• Single phase speed controller.
IREM 3                       CD 99250080
IREM 3 CD 99250080
• Single-phase electronic speed controller
IREM INVERTER 4 M
IREM INVERTER 4 M
Single-phase speed controller
GV2 ME04
GV2 ME04
Thermal-Magnetic motor circuit breaker for ATEX industrial fans.
TR-G 10/15 (GRIGLIA DI PROTEZIONE)
TR-G 10/15 (GRIGLIA DI PROTEZIONE)
Intake port protection grille for use when the unit is mounted within reach.
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info