Description

• Base manufactured from phosphated pressed steel, epoxy powder coated with hammered effect finish, guaranteeing long-term resistance to atmospheric agents.
• Aerodynamically contoured inlet port for optimum performance, fashioned as a single unit with the base and gauged to optimize air flow.
• Pressed steel motor cover: pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Accident prevention and anti-bird grilles (to UNI ISO 13857 standard), consisting of electrically welded steel rings with epoxy powder coated finish, colour black.
• Centrifugal impeller with self-cleaning backward curved steel blades, hot-dip galvanized and dynamically balanced (UNI ISO 1940, Point 1 – Class 6.3), and splined aluminium hub.
• 1 speed three phase AC motor, insulation class H, with shaft turning in double shielded ball bearings.
• Maximum airflow: 16000 m3/h
• Motor and fan designed for operation in ambient temperatures higher than 65 °C.
• Cooling fan for better dissipation of heat
• Galvanized steel eye lugs for transport and lifting/handling operations.
• Cable guaranteeing continuity of earth connection.
• Steel safety wire for anchoring the appliance once installed.
• Vortice speed controller.
Read full descriptionClose description

Certifications

torrette_tr_e_ambiente01
torrette_tr_e_ambiente02

Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    5,95
  • Max absorbed power (W)
    3100
  • Max ambient temperature for continuous operation (°C)
    80
  • Motor protection IP
    55
  • Nominal diameter (mm)
    550
  • Number of phases (Ph)
    3
  • Number of poles
    6
  • Voltage (V)
    400
  • Weight (Kg)
    130
  • Max airflow (l/s)
    4444
  • Max airflow (m³/h)
    16000
  • Max pressure (mmH2O)
    79
  • Max pressure (Pa)
    775
  • RPM
    970
  • Sound pressure Lp [dB (A)] at 3 m
    83
  • Size A (mm)
    1165
  • Size B (mm)
    980
  • Size C (mm)
    900
  • Size D (mm)
    605
  • Size E (mm)
    383
  • Size F (mm)
    38
  • Size G (mm)
    40
  • Size H (mm)
    1026
  • Size L (mm)
    Ø 520
  • Size M (mm)
    Ø 529
  • Size N (mm)
    Ø 805
quota
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.

Accessories

Discover accessories related to the product

IRET INVERTER 8
IRET INVERTER 8
Three-phase speed controller INVERTER
TR-G 100/150/180/210 6-8P(GRIGLI APROT.)
TR-G 100/150/180/210 6-8P(GRIGLI APROT.)
Intake port protection grille for use when the unit is mounted within reach.
TR-B 100/150/180/210 6-8P (BOCC. ASPIR.)
TR-B 100/150/180/210 6-8P (BOCC. ASPIR.)
Intake nozzle to fit on intake side for optimizing intake and reducing noise level.
TR-CU 100/150/180/210 6-8P(CONTROT.BASE)
TR-CU 100/150/180/210 6-8P(CONTROT.BASE)
Installation base counter-frame.
IRET INVERTER 8 M
IRET INVERTER 8 M
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info