Description

• Base manufactured from phosphated pressed steel, epoxy powder coated with hammered effect finish, guaranteeing long-term resistance to atmospheric agents.
• Aerodynamically contoured inlet port for optimum performance, fashioned as a single unit with the base and gauged to optimize air flow.
• Pressed steel motor cover: pickled and phosphated surface, polyester powder coated and oven baked finish, colour grey, with hammered texture.
• Accident prevention and anti-bird grilles (to UNI ISO 13857 standard), consisting of electrically welded steel rings with epoxy powder coated finish, colour black.
• Centrifugal impeller with self-cleaning backward curved steel blades, hot-dip galvanized and dynamically balanced (UNI ISO 1940, Point 1 – Class 6.3), and splined aluminium hub.
• 1 speed three phase AC motor, insulation class F, with shaft turning in double shielded ball bearings.
• Maximum airflow: 1100 m3/h
• Motor and fan designed for operation in ambient temperatures higher than 65 °C.
• Cooling fan for better dissipation of heat
• Galvanized steel eye lugs for transport and lifting/handling operations.
• Cable guaranteeing continuity of earth connection.
• Steel safety wire for anchoring the appliance once installed.
• Vortice speed controller.
Read full descriptionClose description

Certifications

torrette_tr_e_ambiente01
torrette_tr_e_ambiente02

Technical Data Sheet

  • Frequency (Hz)
    50
  • Insulation class
  • Max absorbed current (A)
    2,30
  • Max absorbed power (W)
    1100
  • Max ambient temperature for continuous operation (°C)
    85
  • Motor protection IP
    55
  • Nominal diameter (mm)
    450
  • Number of phases (Ph)
    3
  • Number of poles
    6
  • Voltage (V)
    400
  • Weight (Kg)
    117
  • Max airflow (l/s)
    3000
  • Max airflow (m³/h)
    10800
  • Max pressure (mmH2O)
    48
  • Max pressure (Pa)
    471
  • Max static pressure
    48 Pa 471
  • RPM
    950
  • Sound pressure Lp [dB (A)] at 3 m
    77
  • Size A (mm)
    1165
  • Size B (mm)
    980
  • Size C (mm)
    900
  • Size D (mm)
    605
  • Size E (mm)
    383
  • Size F (mm)
    38
  • Size G (mm)
    40
  • Size H (mm)
    1026
  • Size L (mm)
    Ø 415
  • Size M (mm)
    Ø 421
  • Size N (mm)
    Ø 635
quota
Interested?
If you are interested in this product, contact us or locate your nearest Vortice dealer.

Accessories

Discover accessories related to the product

IREM INVERTER 4.2
IREM INVERTER 4.2
Single-phase speed controller INVERTER
IRET INVERTER 2.2
IRET INVERTER 2.2
Three-phase speed controller INVERTER.
IRT 40
IRT 40
• Three-phase speed controller
IRET 6
IRET 6
• Three-phase electronic speed controller
TR-G 100/150/180/210 6-8P(GRIGLI APROT.)
TR-G 100/150/180/210 6-8P(GRIGLI APROT.)
Intake port protection grille for use when the unit is mounted within reach.
TR-B 100/150/180/210 6-8P (BOCC. ASPIR.)
TR-B 100/150/180/210 6-8P (BOCC. ASPIR.)
Intake nozzle to fit on intake side for optimizing intake and reducing noise level.
TR-CU 100/150/180/210 6-8P(CONTROT.BASE)
TR-CU 100/150/180/210 6-8P(CONTROT.BASE)
Installation base counter-frame.
IRET INVERTER 5 M
IRET INVERTER 5 M
Three-phase speed controller
Cookies help us to provide our services. By using these services, you accept our use of cookies. Info